Possibilities are almost any piece of unfinished wood furniture you purchase will come with some issues. Many times they’re going to have parts that stick or loose joints. They can in addition have knots in the wood, saw marks, and coarse edges. It’s best to take some time to correct any issues with the furniture before you apply the varnish.
The first task when preparing your unfinished wood furniture is to make sure it is put together correctly. Carefully look at all the joints to determine if there are any feeble areas. One place where they can frequently be found is on the drawers. Most unfinished wood f ixtures is put together with stapes. When the staples are in properly you shouldn’t have any Problems. Occasionally they ‘ll need to be reinforced with finishing nails. To help to keep the wood from splitting it is best to drill a pilot hole before putting the nail in. Re-glue any loose arms, rungs, or legs and inspect to see that drawers slide easily on their runners.
Your next step ought to be to rigorously inspect the wood for sap. Clean up any sap or resin which has toughened and clear out any knots and sap pockets via turpentine. If the knots are loose it’s best to completely remove them and then glue them in effect. Sand the pieces completely to get rid of any coarse edges. Commence with rough sandpaper and work your way to a fine grit. Fill in any low spots or gaps with putty or wood filler. Don’t employ a planer as this may chip the wood.
Before you finish your unfinished wood furniture it needs to be scrupulously sealed. When wood isn’t sealed it can create issues as the wood expands and contracts with changes in temperature and humidity. Don’t forget the seal the inside of drawers and other concealed parts of the piece to prevent warping and splitting.
